Getting a beautiful and inexpensive dresser always appears like a fortunate find, till you’ve used it for some time, and alas, the bottoms of the drawers start sagging. It’s particularly frustrating, particularly if left unrepaired for too long, leading to the full destruction of the drawer. So, what’s the strategy to this furnishings problem?
To fix a sagging drawer bottom depends on the substances you’ve and the way badly damaged the drawer backside is. If broken or cracked, you can update the bottom panel with thicker plywood. The other less complicated recommendations contain reinforcing the bottom with braces or using square wooden moldings.
In this article, we’ll provide you with special step-by-step checklist on a way to fix your drawer bottom utilizing 4 different methods. Luckily, these are not very problematic carpentry jobs, so you can do it your self and repair your drawer to usual function in no time.
1. Replace the Thin Backside With a Thicker Plywood
This first technique of fixing a sagging drawer bottom is definitely one of the hardest of the three. Even so, it’s still not too complex, as you’ll quickly see.
If the bottom panel of your drawer is cracked or outrightly broken, then it is your go-to answer considering that exchanging the broken backside is inevitable. You could additionally select this technique if you want a extra solid bottom that will last longer and face up to the heavier drawer contents.
Disassemble the Drawer and Eliminate the Bottom
The first step during this method is setting apart the flimsy bottom from the drawer. This will require you to disassemble the total drawer. When you are the person who put together the furniture after buying it, then disassembling it clearly comprises reversing that process.
Go step by way of step, dismantling the joins and putting the drawer aside one piece at a time. In case you still can’t determine the way to do this, then follow the instructions that got here with the furniture. Take out every thing from the drawer, adding the dowels and screws.
Measure and Reduce Out a New Bottom Panel
You can purchase a new backside panel from the local hardware. Go for plywood that’s thicker than the original. ¼” sheets, for example, are a good size.
Lay down the plywood. Location the original backside on accurate (aiming for a well corner) and race it out onto the plywood. Next, cut the plywood to create the substitute bottom.
Smoothen the Backside Panel Utilizing Sandpaper
To avoid finishing up with splinters on your garments or whatsoever contents you’ll put in the drawer, it’s advisable to tender out the plywood’s surface using sandpaper.
You can effortlessly buy this online, for example, the 3M General Objective Sandpaper Sheets. This sandpaper is easy to apply and is very incredible for DIY projects, including woodworking, to be ideal for this venture.
Widen the Dadoes
Widening the dadoes ought to be performed very carefully and patiently to make sure you don’t take too much material from the grooves. You may use a desk noticed to do this.
Make the dadoes large enough to fit the recent bottom with out being too loose. Try this for the part portions of the drawer, the back, and the front.
Reassemble the Drawer
Now that all of the pieces are ready, you can now reassemble your drawer. The recent backside ought to healthy snugly into the dado grooves.
If you knock on the plywood bottom, you can believe how extra good your improved drawer is. Now you may optimistically shop things in the drawer with out worrying approximately it falling apart.
2. Use Braces to Hold the Bottom in Place
If you don’t desire to update the lowest of the drawer, you could use another approach to repair sagging drawers.
The things you wish to have are:
- Two metal corner braces in keeping with drawer
- A drill
- A length of trees (for supporting the bottom)
- A saw.
Measure and Reduce the Piece of Support Timber
Measure the width of the drawer. Reduce out a similar length of the piece of trees and location it underneath the drawer bottom. This timber should no longer go beyond the decrease part of the drawer; otherwise, you won’t be able to healthy the drawer back in its place.
Secure the Bushes Underneath the Drawer
If you’re operating alone, you’ll need to safe the supporting bushes in place as you progress to the next step. Use covering tape for a short lived hold. You could additionally glue the trees in place, as this will also assist make stronger it.
Drill the Braces on the Inside the Drawer
With the bushes in position, place both nook braces on the inside the drawer instantly above the timber at the two opposite ends. One effective set of braces you can use is the BIG TEDDY Corner Brace. You may get this on Amazon. It’s double-wide compared to other braces, so it’ll supply added reinforcement on your drawer bottom.
Drill in the brace down into the timber beneath. For the front-facing screws, be sure their length matches the width of the the front of the drawer to avert screws popping external to the the front of the drawer.
Place your drawer returned into its place. You may now put in your clothes and other contents.
This technique can also be used if the drawer has sagged from the sides. You only need to upload two different pieces of supporting bushes underneath the lowest of the drawer but alongside the sides.
3. Make stronger With Rectangular Wooden Moldings
One of the excuses the bottom of the drawer pops out so easily is because the dado grooves alongside the sides, front, and back are so tiny. You may right this through adding rectangular wooden moldings alongside the perimeters of the drawer bottom.
This method is going to make stronger the drawer bottom and cut down any chances of it coming off from the grooves of the drawer.
Here are the matters you’ll need:
- Square wood molding
- Wood glue
- Nails like brads
- Woodworking clamps (optional)
Measure and Reduce the Square Moldings
Measure the length and width of the drawer and reduce pieces of the square wood molding in step with those lengths. Every of the moldings would be positioned on the respective side, front, or back of the drawer.
Glue the Rectangular Moldings Below the Drawer
Position the drawer backside lower back in place (push it into the grooves). If the edges are sagging too much and can’t continue to be in position, you could use the woodworking clamps for support.
Using the wooden glue, glue every piece of square wood molding underneath the drawer. Leave them overnight to set.
Nail the Moldings in Place
Fasten the wooden moldings in location through nailing them via to the sides. You could use brads yet be sure they’re of the correct size to prevent them from piercing throughout the sides, front, or lower back of the drawer.
Put your drawer back in its place. It’s now all set for use.
4. Get a Drawer Repair Kit
Fixing a sagging drawer backside isn’t so complex. You can make it your subsequent DIY project and paintings on each of the defective drawers on your home.
We’ve outlined three methods of adjusting sagging drawers; exchanging the skinny and flimsy backside with a extra reliable panel, using angle metal braces to hold the bottom in place, or reinforcing the drawer bottom using rectangular wood moldings.
As a bonus, if your DIY skills are really poor, you may buy a quick fix in your faulty drawers. The Fix a Drawer package is a superb answer that’s moderately priced and easy to install, so you don’t need to spend hours fixing furniture.
Here’s a video on how to use this kit:
The faster you repair any damaged drawer bottom, the better seeing that it will now not get worse and ruin the fixtures altogether.